mountdoor YM Backpack -Wandering-
Specification
Capacity: about 40L
Product weight:
ECOPAK200D about 630g (695g including waist belt) / about 745g including back pad + belt
Size: M / L (difference in back length and shoulder pad length)
Recommended load: Approximately 9kg (Although the snow mountain test was carried out with a load of 18kg including the rope and cleared, deterioration was seen in each part)
Main body waterproof fabric: ECOPAK200D
Color: Coyote / Black / White / R-Green
Country of Origin:Japan
Materials:
Front stretch pocket: Ultra™ stretch – UHMWPE /6-6 nylon/Lycra (water repellent nylon stretch fabric)
Back ～ shoulder pads: double raschel mesh + 420D OX nylon
Bottom (including side pockets): Cordura high density 420D nylon
Nylon Tape: Motohashi Tape - Thin High Density Nylon Tape
Zipper: YKK Aquaguard bungee cord
Features
1: Size
The size is divided by "back length" without changing the capacity. The base of the shoulder pad is located lower for the M size than for the L size, and the length of the shoulder pad is slightly shorter for the M size.
Back length M size about 47cm
L size about 52.5cm
Capacity is about 35 L. The "roll top" is not included in the capacity, and the roll top is about 5L, so the total is about 40 L. The recommended load is about 8-9kg. We have tested it up to 18 kg, but it is recommended to use less than the recommended value because it may cause screams on the sewing surface.
2: Stretch pocket
The front pocket is made from challenge sail-cloth's strong stretch water-repellent material.
3: Roll top pocket
The streamer is equipped with a small pocket with a width of about 26 cm and a length of about 18 cm. It can be stored without opening the rucksack when taking out small items. It can also store thin wind jackets and rain jackets, so you can expand the width by using it separately from the front stretch pocket.
4: Side pocket
The side pockets are made of hard mesh and the bottom is made of cordura high-density nylon 420D, so Mountdoor san have selected materials that are easy to handle. Designed to hold up to 2 bottles. A 2L PET bottle can be stored roughly like this. You can also store trekking poles.
The side pockets are adjustable by pulling bungee cords. In addition, eyelets are arranged on the bottom of the pocket to help drain water.
5: Roll top
Since it is equipped with a dual adjuster, the shape of the roll top can be changed at least 3 patterns. In addition, the compression in the middle of the rucksack side, you can adjust the tension by moving the slide parts to the left and right, so it is useful for adjusting the packing when the roll top is packed inside and you can change the shape of the backpack according to your mood at that time. The slide part pulls the roll top down to facilitate proper packing.
6: Adjuster Tape
The tape used for the adjuster part is a "thin" high-density nylon tape that can be adjusted quickly. Wandering is designed mainly for "hike", so it is not the thick tape used for the 2022:YM Back pack.
7: Load Distribution Type
The YM Back pack (2022 model) is finished in the center of the shoulder blade like a trail running pack and follows the design theory. However, the Wandering (40L) has a larger capacity, so if you only use your shoulder blades for long periods of time, it will be a burden. Therefore, Mountdoor san have equipped the waist belt as standard this time so that it can be dispersed even a little.
For the back length, please measure the length from the protruding part of the neck bone to the vicinity of the tailbone and select the size that fits.
8: Bottom Compression Cord
There are various ways to use the bottom compression cord. It is possible to fix a sleeping mat like this, and it is also possible to fix tri-fold trekking poles.
9: Load Lifter
The load lifter is currently standard equipment in the YM Back pack. The position of the load lifter is the same for both M size and L size, but the "back length" is different.
10: Dual Adjuster Parts
The top and bottom of the adjuster parts on the side are dual, so you can fix the ice ax or connect the left and right to compress in front of the front pocket, and you can also fix flat items such as snowshoes. However, if the teeth are not attached to the valley side, There is also the possibility that the tooth may get caught in the pocket and be punctured or torn due to vibration during movement. Therefore, when externally attaching snowshoes, etc., it is recommended to put the teeth side outside .
Photos by morimori
Text translated by morimori
Specification
Capacity: about 40L
Product weight:
ECOPAK200D about 630g (695g including waist belt) / about 745g including back pad + belt
Size: M / L (difference in back length and shoulder pad length)
Recommended load: Approximately 9kg (Although the snow mountain test was carried out with a load of 18kg including the rope and cleared, deterioration was seen in each part)
Main body waterproof fabric: ECOPAK200D
Color: Coyote / Black / White / R-Green
Country of Origin:Japan
Materials:
Front stretch pocket: Ultra™ stretch – UHMWPE /6-6 nylon/Lycra (water repellent nylon stretch fabric)
Back ～ shoulder pads: double raschel mesh + 420D OX nylon
Bottom (including side pockets): Cordura high density 420D nylon
Nylon Tape: Motohashi Tape - Thin High Density Nylon Tape
Zipper: YKK Aquaguard bungee cord
Features
1: Size
The size is divided by "back length" without changing the capacity. The base of the shoulder pad is located lower for the M size than for the L size, and the length of the shoulder pad is slightly shorter for the M size.
Back length M size about 47cm
L size about 52.5cm
Capacity is about 35 L. The "roll top" is not included in the capacity, and the roll top is about 5L, so the total is about 40 L. The recommended load is about 8-9kg. We have tested it up to 18 kg, but it is recommended to use less than the recommended value because it may cause screams on the sewing surface.
2: Stretch pocket
The front pocket is made from challenge sail-cloth's strong stretch water-repellent material.
3: Roll top pocket
The streamer is equipped with a small pocket with a width of about 26 cm and a length of about 18 cm. It can be stored without opening the rucksack when taking out small items. It can also store thin wind jackets and rain jackets, so you can expand the width by using it separately from the front stretch pocket.
4: Side pocket
The side pockets are made of hard mesh and the bottom is made of cordura high-density nylon 420D, so Mountdoor san have selected materials that are easy to handle. Designed to hold up to 2 bottles. A 2L PET bottle can be stored roughly like this. You can also store trekking poles.
The side pockets are adjustable by pulling bungee cords. In addition, eyelets are arranged on the bottom of the pocket to help drain water.
5: Roll top
Since it is equipped with a dual adjuster, the shape of the roll top can be changed at least 3 patterns. In addition, the compression in the middle of the rucksack side, you can adjust the tension by moving the slide parts to the left and right, so it is useful for adjusting the packing when the roll top is packed inside and you can change the shape of the backpack according to your mood at that time. The slide part pulls the roll top down to facilitate proper packing.
6: Adjuster Tape
The tape used for the adjuster part is a "thin" high-density nylon tape that can be adjusted quickly. Wandering is designed mainly for "hike", so it is not the thick tape used for the 2022:YM Back pack.
7: Load Distribution Type
The YM Back pack (2022 model) is finished in the center of the shoulder blade like a trail running pack and follows the design theory. However, the Wandering (40L) has a larger capacity, so if you only use your shoulder blades for long periods of time, it will be a burden. Therefore, Mountdoor san have equipped the waist belt as standard this time so that it can be dispersed even a little.
For the back length, please measure the length from the protruding part of the neck bone to the vicinity of the tailbone and select the size that fits.
8: Bottom Compression Cord
There are various ways to use the bottom compression cord. It is possible to fix a sleeping mat like this, and it is also possible to fix tri-fold trekking poles.
9: Load Lifter
The load lifter is currently standard equipment in the YM Back pack. The position of the load lifter is the same for both M size and L size, but the "back length" is different.
10: Dual Adjuster Parts
The top and bottom of the adjuster parts on the side are dual, so you can fix the ice ax or connect the left and right to compress in front of the front pocket, and you can also fix flat items such as snowshoes. However, if the teeth are not attached to the valley side, There is also the possibility that the tooth may get caught in the pocket and be punctured or torn due to vibration during movement. Therefore, when externally attaching snowshoes, etc., it is recommended to put the teeth side outside .
Photos by morimori
Text translated by morimori
Specification
Capacity: about 40L
Product weight:
ECOPAK200D about 630g (695g including waist belt) / about 745g including back pad + belt
Size: M / L (difference in back length and shoulder pad length)
Recommended load: Approximately 9kg (Although the snow mountain test was carried out with a load of 18kg including the rope and cleared, deterioration was seen in each part)
Main body waterproof fabric: ECOPAK200D
Color: Coyote / Black / White / R-Green
Country of Origin:Japan
Materials:
Front stretch pocket: Ultra™ stretch – UHMWPE /6-6 nylon/Lycra (water repellent nylon stretch fabric)
Back ～ shoulder pads: double raschel mesh + 420D OX nylon
Bottom (including side pockets): Cordura high density 420D nylon
Nylon Tape: Motohashi Tape - Thin High Density Nylon Tape
Zipper: YKK Aquaguard bungee cord
Features
1: Size
The size is divided by "back length" without changing the capacity. The base of the shoulder pad is located lower for the M size than for the L size, and the length of the shoulder pad is slightly shorter for the M size.
Back length M size about 47cm
L size about 52.5cm
Capacity is about 35 L. The "roll top" is not included in the capacity, and the roll top is about 5L, so the total is about 40 L. The recommended load is about 8-9kg. We have tested it up to 18 kg, but it is recommended to use less than the recommended value because it may cause screams on the sewing surface.
2: Stretch pocket
The front pocket is made from challenge sail-cloth's strong stretch water-repellent material.
3: Roll top pocket
The streamer is equipped with a small pocket with a width of about 26 cm and a length of about 18 cm. It can be stored without opening the rucksack when taking out small items. It can also store thin wind jackets and rain jackets, so you can expand the width by using it separately from the front stretch pocket.
4: Side pocket
The side pockets are made of hard mesh and the bottom is made of cordura high-density nylon 420D, so Mountdoor san have selected materials that are easy to handle. Designed to hold up to 2 bottles. A 2L PET bottle can be stored roughly like this. You can also store trekking poles.
The side pockets are adjustable by pulling bungee cords. In addition, eyelets are arranged on the bottom of the pocket to help drain water.
5: Roll top
Since it is equipped with a dual adjuster, the shape of the roll top can be changed at least 3 patterns. In addition, the compression in the middle of the rucksack side, you can adjust the tension by moving the slide parts to the left and right, so it is useful for adjusting the packing when the roll top is packed inside and you can change the shape of the backpack according to your mood at that time. The slide part pulls the roll top down to facilitate proper packing.
6: Adjuster Tape
The tape used for the adjuster part is a "thin" high-density nylon tape that can be adjusted quickly. Wandering is designed mainly for "hike", so it is not the thick tape used for the 2022:YM Back pack.
7: Load Distribution Type
The YM Back pack (2022 model) is finished in the center of the shoulder blade like a trail running pack and follows the design theory. However, the Wandering (40L) has a larger capacity, so if you only use your shoulder blades for long periods of time, it will be a burden. Therefore, Mountdoor san have equipped the waist belt as standard this time so that it can be dispersed even a little.
For the back length, please measure the length from the protruding part of the neck bone to the vicinity of the tailbone and select the size that fits.
8: Bottom Compression Cord
There are various ways to use the bottom compression cord. It is possible to fix a sleeping mat like this, and it is also possible to fix tri-fold trekking poles.
9: Load Lifter
The load lifter is currently standard equipment in the YM Back pack. The position of the load lifter is the same for both M size and L size, but the "back length" is different.
10: Dual Adjuster Parts
The top and bottom of the adjuster parts on the side are dual, so you can fix the ice ax or connect the left and right to compress in front of the front pocket, and you can also fix flat items such as snowshoes. However, if the teeth are not attached to the valley side, There is also the possibility that the tooth may get caught in the pocket and be punctured or torn due to vibration during movement. Therefore, when externally attaching snowshoes, etc., it is recommended to put the teeth side outside .
Photos by morimori
Text translated by morimori