SAYAMA works Dustin Holder 2G Flap
Material: X-PAC VX21 Black / Spectra® cross diamond Black
Size: Height 16 cm (25.5 cm when the flap is open)/Width 9 cm/Depth 5.5 cm
Weight: about 70g (There may be difference depending on the thickness of the fabric)
Country of Origin: Japan
<Specifications>
It is a pouch that can be opened and closed with a lid with Velcro on the top of the main unit. It has enough capacity to store both a smartphone and an equivalent mobile battery. In addition, it is suitable for storing mountaineering food, small digital cameras, and etc. In addition, by storing the upper lid inside the main unit, it can also serve as a bottle holder that can hold drink bottles of 500ml to 650ml. You can also attach sunglasses and folding stock to the side. The symmetrical universal design is inherited from Dustin Holder 2G and 2G Kai.
<Mounting method>
1. Attach the slick clip on the top of the Dustin Holder 2G Flap to the top of the shoulder harness.
2. Fix the upper and lower two velcro tapes on the back of the Dustin Holder 2G Flap to the shoulder harness.
3. Untie the nylon tape with buckle at the bottom of the Dustin Holder 2G Flap and pass it through the top of the shoulder harness. Pass the nylon tape through the buckle of the bottle holder again and pull it to fix it.
By fixing to the shoulder harness at up to 4 places, you can prevent the shaking of bottles as much as possible. Furthermore, when storing the bottle, the rubber cord in the center of the Dustin Holder 2G Flap can be hooked on the bottle cap to prevent the bottle from shaking or falling.
<Precautions for use>
・ We cannot accept returns or exchanges other than initial defects.
・ Some bottles may not fit depending on the shape of the bottle.
・ Depending on the shape of the shoulder harness, it may not be possible to fix it. If you have any doubts, please contact morimori first.
・Rubber cords may not be attached to long bottles. It is generally recommended to use 500ml to 650ml PET water bottles or bicycle water bottles.
・The product comes with the installation instructions of Dustin Holder 2G Flap. If it fails to install, you can contact morimori for assistance.
・We are not responsible for any damage to clothing or mountain tools caused by mis-docking with the Dustin Holder 2G Flap.
*Backpacks that can be attached Dustin Holder 2G Flap include but are not limited to the models of the following brands:
・Yamatomichi: ONE・THREE・Mini・Mini2
・RawLow Mountain Works: Bambi ・Antelope
・OMM Classic 25
・Part of Hyperlite Mountain Gear backpacks are applicable
・and wander X-pac 30L, 40L, 45L backpacks ,cuben fiber backpack and 40L old version backpack are applicable
*Product information translated and written by morimori
Material: X-PAC VX21 Black / Spectra® cross diamond Black
Size: Height 16 cm (25.5 cm when the flap is open)/Width 9 cm/Depth 5.5 cm
Weight: about 70g (There may be difference depending on the thickness of the fabric)
Country of Origin: Japan
<Specifications>
It is a pouch that can be opened and closed with a lid with Velcro on the top of the main unit. It has enough capacity to store both a smartphone and an equivalent mobile battery. In addition, it is suitable for storing mountaineering food, small digital cameras, and etc. In addition, by storing the upper lid inside the main unit, it can also serve as a bottle holder that can hold drink bottles of 500ml to 650ml. You can also attach sunglasses and folding stock to the side. The symmetrical universal design is inherited from Dustin Holder 2G and 2G Kai.
<Mounting method>
1. Attach the slick clip on the top of the Dustin Holder 2G Flap to the top of the shoulder harness.
2. Fix the upper and lower two velcro tapes on the back of the Dustin Holder 2G Flap to the shoulder harness.
3. Untie the nylon tape with buckle at the bottom of the Dustin Holder 2G Flap and pass it through the top of the shoulder harness. Pass the nylon tape through the buckle of the bottle holder again and pull it to fix it.
By fixing to the shoulder harness at up to 4 places, you can prevent the shaking of bottles as much as possible. Furthermore, when storing the bottle, the rubber cord in the center of the Dustin Holder 2G Flap can be hooked on the bottle cap to prevent the bottle from shaking or falling.
<Precautions for use>
・ We cannot accept returns or exchanges other than initial defects.
・ Some bottles may not fit depending on the shape of the bottle.
・ Depending on the shape of the shoulder harness, it may not be possible to fix it. If you have any doubts, please contact morimori first.
・Rubber cords may not be attached to long bottles. It is generally recommended to use 500ml to 650ml PET water bottles or bicycle water bottles.
・The product comes with the installation instructions of Dustin Holder 2G Flap. If it fails to install, you can contact morimori for assistance.
・We are not responsible for any damage to clothing or mountain tools caused by mis-docking with the Dustin Holder 2G Flap.
*Backpacks that can be attached Dustin Holder 2G Flap include but are not limited to the models of the following brands:
・Yamatomichi: ONE・THREE・Mini・Mini2
・RawLow Mountain Works: Bambi ・Antelope
・OMM Classic 25
・Part of Hyperlite Mountain Gear backpacks are applicable
・and wander X-pac 30L, 40L, 45L backpacks ,cuben fiber backpack and 40L old version backpack are applicable
*Product information translated and written by morimori
Material: X-PAC VX21 Black / Spectra® cross diamond Black
Size: Height 16 cm (25.5 cm when the flap is open)/Width 9 cm/Depth 5.5 cm
Weight: about 70g (There may be difference depending on the thickness of the fabric)
Country of Origin: Japan
<Specifications>
It is a pouch that can be opened and closed with a lid with Velcro on the top of the main unit. It has enough capacity to store both a smartphone and an equivalent mobile battery. In addition, it is suitable for storing mountaineering food, small digital cameras, and etc. In addition, by storing the upper lid inside the main unit, it can also serve as a bottle holder that can hold drink bottles of 500ml to 650ml. You can also attach sunglasses and folding stock to the side. The symmetrical universal design is inherited from Dustin Holder 2G and 2G Kai.
<Mounting method>
1. Attach the slick clip on the top of the Dustin Holder 2G Flap to the top of the shoulder harness.
2. Fix the upper and lower two velcro tapes on the back of the Dustin Holder 2G Flap to the shoulder harness.
3. Untie the nylon tape with buckle at the bottom of the Dustin Holder 2G Flap and pass it through the top of the shoulder harness. Pass the nylon tape through the buckle of the bottle holder again and pull it to fix it.
By fixing to the shoulder harness at up to 4 places, you can prevent the shaking of bottles as much as possible. Furthermore, when storing the bottle, the rubber cord in the center of the Dustin Holder 2G Flap can be hooked on the bottle cap to prevent the bottle from shaking or falling.
<Precautions for use>
・ We cannot accept returns or exchanges other than initial defects.
・ Some bottles may not fit depending on the shape of the bottle.
・ Depending on the shape of the shoulder harness, it may not be possible to fix it. If you have any doubts, please contact morimori first.
・Rubber cords may not be attached to long bottles. It is generally recommended to use 500ml to 650ml PET water bottles or bicycle water bottles.
・The product comes with the installation instructions of Dustin Holder 2G Flap. If it fails to install, you can contact morimori for assistance.
・We are not responsible for any damage to clothing or mountain tools caused by mis-docking with the Dustin Holder 2G Flap.
*Backpacks that can be attached Dustin Holder 2G Flap include but are not limited to the models of the following brands:
・Yamatomichi: ONE・THREE・Mini・Mini2
・RawLow Mountain Works: Bambi ・Antelope
・OMM Classic 25
・Part of Hyperlite Mountain Gear backpacks are applicable
・and wander X-pac 30L, 40L, 45L backpacks ,cuben fiber backpack and 40L old version backpack are applicable
*Product information translated and written by morimori