SAYAMA works Dustin Holder 2G
Size:
Height 11cm in the front and 14cm in the back, Inner diameter about 26cm
Weight: X-PAC 40g, Spectra® cross diamond 40g, DCF 37g
(There may be difference depending on the thickness of the fabric)
Country of Origin: Japan
<Product Development Background>
Two years ago, Mr. Daisuke Katano (Yamatomichi Ambassador), who completed TJAR 2018, requested that Mr Sayama to make an external bottle holder to be attached to the backpack. After receiving many calls, Mr Sayama decided to accept the request. Mr Sayama designed it precisely assuming that it would be used by TJAR warriors, and repeated trial production based on Mr. Katano's feedback. As a result, an external bottle holder was created which does not shake as much as possible. In order to thank Mr. Daisuke Katano for making the products reach high standards in terms of high durability, functionality and lightness, Mr. Sayama named the bottle holder with Mr. Daisuke Katano's nickname "Dustin".
<Specifications>
By attaching it to the shoulder harness of the backpack, it is possible to store and take out 500ml PET bottles/cycling bottles without lowering the backpack. You can also dock sunglasses and foldable stock by attaching an optional rubber cord to the dustin holder.
What Mr Sayama was particularly think about with the Dustin Holder was the universal design and it’s conscious of left-right symmetry. Each part is designed to be detached so that it can be handled by both left-handed and right-handed people.
<Mounting method>
1. Attach the slick clip on the top of the Dustin Holder to the top of the shoulder harness.
2. Fix the upper and lower two velcro tapes on the back of the Dustin Holder to the shoulder harness.
3. Untie the nylon tape with buckle at the bottom of the Dustin Holder and pass it through the top of the shoulder harness. Pass the nylon tape through the buckle of the bottle holder again and pull it to fix it.
By fixing to the shoulder harness at up to 4 places, you can prevent the shaking of bottles as much as possible. Furthermore, when storing the bottle, the rubber cord in the center of the Dustin Holder can be hooked on the bottle cap to prevent the bottle from shaking or falling.
<Precautions for use>
・ We cannot accept returns or exchanges other than initial defects.
・ Some bottles may not fit depending on the shape of the bottle.
・ Depending on the shape of the shoulder harness, it may not be possible to fix it. In that case, please order it after confirming the stability only at the place where it is attached.
・Rubber cords may not be attached to long bottles. It is generally recommended to use 500ml PET water bottles or bicycle water bottles.
・The product comes with the installation instructions of Dustin Holder. If it fails to install, you can contact morimori for assistance.
・We are not responsible for any damage to clothing or mountain tools caused by mis-docking with the Dustin Holder.
*Backpacks that can be attached Dustin Holder include but are not limited to the models of the following brands:
・山と道: ONE・THREE・Mini・Mini2
・RawLow Mountain Works: Bambi ・Antelope
・OMM Classic 25
・Part of Hyperlite Mountain Gear backpacks are applicable
・and wander X-pac 30L, 40L, 45L backpacks ,cuben fiber backpack and 40L old version backpack are applicable
*Product information translated and written by morimori
Size:
Height 11cm in the front and 14cm in the back, Inner diameter about 26cm
Weight: X-PAC 40g, Spectra® cross diamond 40g, DCF 37g
(There may be difference depending on the thickness of the fabric)
Country of Origin: Japan
<Product Development Background>
Two years ago, Mr. Daisuke Katano (Yamatomichi Ambassador), who completed TJAR 2018, requested that Mr Sayama to make an external bottle holder to be attached to the backpack. After receiving many calls, Mr Sayama decided to accept the request. Mr Sayama designed it precisely assuming that it would be used by TJAR warriors, and repeated trial production based on Mr. Katano's feedback. As a result, an external bottle holder was created which does not shake as much as possible. In order to thank Mr. Daisuke Katano for making the products reach high standards in terms of high durability, functionality and lightness, Mr. Sayama named the bottle holder with Mr. Daisuke Katano's nickname "Dustin".
<Specifications>
By attaching it to the shoulder harness of the backpack, it is possible to store and take out 500ml PET bottles/cycling bottles without lowering the backpack. You can also dock sunglasses and foldable stock by attaching an optional rubber cord to the dustin holder.
What Mr Sayama was particularly think about with the Dustin Holder was the universal design and it’s conscious of left-right symmetry. Each part is designed to be detached so that it can be handled by both left-handed and right-handed people.
<Mounting method>
1. Attach the slick clip on the top of the Dustin Holder to the top of the shoulder harness.
2. Fix the upper and lower two velcro tapes on the back of the Dustin Holder to the shoulder harness.
3. Untie the nylon tape with buckle at the bottom of the Dustin Holder and pass it through the top of the shoulder harness. Pass the nylon tape through the buckle of the bottle holder again and pull it to fix it.
By fixing to the shoulder harness at up to 4 places, you can prevent the shaking of bottles as much as possible. Furthermore, when storing the bottle, the rubber cord in the center of the Dustin Holder can be hooked on the bottle cap to prevent the bottle from shaking or falling.
<Precautions for use>
・ We cannot accept returns or exchanges other than initial defects.
・ Some bottles may not fit depending on the shape of the bottle.
・ Depending on the shape of the shoulder harness, it may not be possible to fix it. In that case, please order it after confirming the stability only at the place where it is attached.
・Rubber cords may not be attached to long bottles. It is generally recommended to use 500ml PET water bottles or bicycle water bottles.
・The product comes with the installation instructions of Dustin Holder. If it fails to install, you can contact morimori for assistance.
・We are not responsible for any damage to clothing or mountain tools caused by mis-docking with the Dustin Holder.
*Backpacks that can be attached Dustin Holder include but are not limited to the models of the following brands:
・山と道: ONE・THREE・Mini・Mini2
・RawLow Mountain Works: Bambi ・Antelope
・OMM Classic 25
・Part of Hyperlite Mountain Gear backpacks are applicable
・and wander X-pac 30L, 40L, 45L backpacks ,cuben fiber backpack and 40L old version backpack are applicable
*Product information translated and written by morimori
Size:
Height 11cm in the front and 14cm in the back, Inner diameter about 26cm
Weight: X-PAC 40g, Spectra® cross diamond 40g, DCF 37g
(There may be difference depending on the thickness of the fabric)
Country of Origin: Japan
<Product Development Background>
Two years ago, Mr. Daisuke Katano (Yamatomichi Ambassador), who completed TJAR 2018, requested that Mr Sayama to make an external bottle holder to be attached to the backpack. After receiving many calls, Mr Sayama decided to accept the request. Mr Sayama designed it precisely assuming that it would be used by TJAR warriors, and repeated trial production based on Mr. Katano's feedback. As a result, an external bottle holder was created which does not shake as much as possible. In order to thank Mr. Daisuke Katano for making the products reach high standards in terms of high durability, functionality and lightness, Mr. Sayama named the bottle holder with Mr. Daisuke Katano's nickname "Dustin".
<Specifications>
By attaching it to the shoulder harness of the backpack, it is possible to store and take out 500ml PET bottles/cycling bottles without lowering the backpack. You can also dock sunglasses and foldable stock by attaching an optional rubber cord to the dustin holder.
What Mr Sayama was particularly think about with the Dustin Holder was the universal design and it’s conscious of left-right symmetry. Each part is designed to be detached so that it can be handled by both left-handed and right-handed people.
<Mounting method>
1. Attach the slick clip on the top of the Dustin Holder to the top of the shoulder harness.
2. Fix the upper and lower two velcro tapes on the back of the Dustin Holder to the shoulder harness.
3. Untie the nylon tape with buckle at the bottom of the Dustin Holder and pass it through the top of the shoulder harness. Pass the nylon tape through the buckle of the bottle holder again and pull it to fix it.
By fixing to the shoulder harness at up to 4 places, you can prevent the shaking of bottles as much as possible. Furthermore, when storing the bottle, the rubber cord in the center of the Dustin Holder can be hooked on the bottle cap to prevent the bottle from shaking or falling.
<Precautions for use>
・ We cannot accept returns or exchanges other than initial defects.
・ Some bottles may not fit depending on the shape of the bottle.
・ Depending on the shape of the shoulder harness, it may not be possible to fix it. In that case, please order it after confirming the stability only at the place where it is attached.
・Rubber cords may not be attached to long bottles. It is generally recommended to use 500ml PET water bottles or bicycle water bottles.
・The product comes with the installation instructions of Dustin Holder. If it fails to install, you can contact morimori for assistance.
・We are not responsible for any damage to clothing or mountain tools caused by mis-docking with the Dustin Holder.
*Backpacks that can be attached Dustin Holder include but are not limited to the models of the following brands:
・山と道: ONE・THREE・Mini・Mini2
・RawLow Mountain Works: Bambi ・Antelope
・OMM Classic 25
・Part of Hyperlite Mountain Gear backpacks are applicable
・and wander X-pac 30L, 40L, 45L backpacks ,cuben fiber backpack and 40L old version backpack are applicable
*Product information translated and written by morimori