Ridge Mountain Gear Stuff Sack
SPEC
Material: Dyneema® CT2E.08
Surface: Polyester coating
Middle layer: Polyethylene fiber (UHMWPE fiber)
Back side: polyester coating
Size: Height 34cm x Width 29.5cm x Bottom gusset depth 12cm, capacity approximately 8ℓ
Weight: Approx. 14g
Country of Origin: Japan
Producer: Uchino Co., Ltd., Kamisu City, Ibaraki Prefecture
The material used is "Dyneema® CT2E.08".
This material is composed of a polyester film coating on the surface + a middle layer of 0°/90° UHMWPE (*1) fiber + a polyester film coating on the back. Although it is lightweight, it is extremely durable and waterproof (water pressure resistance 20,000mm).
(*1) UHMWPE is an abbreviation for Ultra High Molecular Weight Polyethylene. Ultra-high molecular weight polyethylene is polyethylene that has an average molecular weight of 1 million or more, has excellent slip properties, wear resistance, and is classified as an engineering plastic with high strength.
Introduction
Most stuff sacks currently on the market are made of silnylon. When Yusuke san first started hiking, he used to use a stuff sack made of silnylon, but it often slipped too much when he was packing and the position of the stuff sack was not stable inside his backpack, so he gradually started using stuff sacks made made from Dyneema® Composite Fabric.
Dyneema® Composite Fabric stuff sacks are less slippery, easier to pack, and more durable than silnylon. This product is also recommended to be used as a pillow when storing soft belongings such as clothing. This is product can be used in two ways as a staff sack or as a mini shoulder bag.
A polyester grosgrain tape with a width of 1.5 cm and a length of approximately 58 cm is stored on the side of the mouth inside the main unit. (Length adjustment is not possible) You can take it out from inside and use it as a hand strap or shoulder strap depending on the usage situation.
You can use it as an ordinary staff sack when hiking, and you can use it as a mini shoulder bag.
The load capacity is assumed to be about 1.5 kg. The sewn part may be damaged if you use it with more belongings.
Please note that the fabric itself is waterproof, but it is not completely waterproof because the seams of the product are not seamed.
It will be packed in the "RIDGE MOUNTAI GEAR aLOKSAK XXS".
*photo credit: Ridge Mountain Gear official website(https://www.ridge-mountaingear.com/)
*Product information translated by morimori
SPEC
Material: Dyneema® CT2E.08
Surface: Polyester coating
Middle layer: Polyethylene fiber (UHMWPE fiber)
Back side: polyester coating
Size: Height 34cm x Width 29.5cm x Bottom gusset depth 12cm, capacity approximately 8ℓ
Weight: Approx. 14g
Country of Origin: Japan
Producer: Uchino Co., Ltd., Kamisu City, Ibaraki Prefecture
The material used is "Dyneema® CT2E.08".
This material is composed of a polyester film coating on the surface + a middle layer of 0°/90° UHMWPE (*1) fiber + a polyester film coating on the back. Although it is lightweight, it is extremely durable and waterproof (water pressure resistance 20,000mm).
(*1) UHMWPE is an abbreviation for Ultra High Molecular Weight Polyethylene. Ultra-high molecular weight polyethylene is polyethylene that has an average molecular weight of 1 million or more, has excellent slip properties, wear resistance, and is classified as an engineering plastic with high strength.
Introduction
Most stuff sacks currently on the market are made of silnylon. When Yusuke san first started hiking, he used to use a stuff sack made of silnylon, but it often slipped too much when he was packing and the position of the stuff sack was not stable inside his backpack, so he gradually started using stuff sacks made made from Dyneema® Composite Fabric.
Dyneema® Composite Fabric stuff sacks are less slippery, easier to pack, and more durable than silnylon. This product is also recommended to be used as a pillow when storing soft belongings such as clothing. This is product can be used in two ways as a staff sack or as a mini shoulder bag.
A polyester grosgrain tape with a width of 1.5 cm and a length of approximately 58 cm is stored on the side of the mouth inside the main unit. (Length adjustment is not possible) You can take it out from inside and use it as a hand strap or shoulder strap depending on the usage situation.
You can use it as an ordinary staff sack when hiking, and you can use it as a mini shoulder bag.
The load capacity is assumed to be about 1.5 kg. The sewn part may be damaged if you use it with more belongings.
Please note that the fabric itself is waterproof, but it is not completely waterproof because the seams of the product are not seamed.
It will be packed in the "RIDGE MOUNTAI GEAR aLOKSAK XXS".
*photo credit: Ridge Mountain Gear official website(https://www.ridge-mountaingear.com/)
*Product information translated by morimori
SPEC
Material: Dyneema® CT2E.08
Surface: Polyester coating
Middle layer: Polyethylene fiber (UHMWPE fiber)
Back side: polyester coating
Size: Height 34cm x Width 29.5cm x Bottom gusset depth 12cm, capacity approximately 8ℓ
Weight: Approx. 14g
Country of Origin: Japan
Producer: Uchino Co., Ltd., Kamisu City, Ibaraki Prefecture
The material used is "Dyneema® CT2E.08".
This material is composed of a polyester film coating on the surface + a middle layer of 0°/90° UHMWPE (*1) fiber + a polyester film coating on the back. Although it is lightweight, it is extremely durable and waterproof (water pressure resistance 20,000mm).
(*1) UHMWPE is an abbreviation for Ultra High Molecular Weight Polyethylene. Ultra-high molecular weight polyethylene is polyethylene that has an average molecular weight of 1 million or more, has excellent slip properties, wear resistance, and is classified as an engineering plastic with high strength.
Introduction
Most stuff sacks currently on the market are made of silnylon. When Yusuke san first started hiking, he used to use a stuff sack made of silnylon, but it often slipped too much when he was packing and the position of the stuff sack was not stable inside his backpack, so he gradually started using stuff sacks made made from Dyneema® Composite Fabric.
Dyneema® Composite Fabric stuff sacks are less slippery, easier to pack, and more durable than silnylon. This product is also recommended to be used as a pillow when storing soft belongings such as clothing. This is product can be used in two ways as a staff sack or as a mini shoulder bag.
A polyester grosgrain tape with a width of 1.5 cm and a length of approximately 58 cm is stored on the side of the mouth inside the main unit. (Length adjustment is not possible) You can take it out from inside and use it as a hand strap or shoulder strap depending on the usage situation.
You can use it as an ordinary staff sack when hiking, and you can use it as a mini shoulder bag.
The load capacity is assumed to be about 1.5 kg. The sewn part may be damaged if you use it with more belongings.
Please note that the fabric itself is waterproof, but it is not completely waterproof because the seams of the product are not seamed.
It will be packed in the "RIDGE MOUNTAI GEAR aLOKSAK XXS".
*photo credit: Ridge Mountain Gear official website(https://www.ridge-mountaingear.com/)
*Product information translated by morimori