Ridge Mountain Gear Mesh Basic Cap
Material: Body part 100% nylon, mesh part 100% nylon, sweat-stopper part 100% polyester
Size: One size, Depth approx. 17.5 cm (when placed flat), Eaves length approx. 6 cm, Head circumference approx. 59 cm (adjustable with rubber)
* There may be an difference of ± 1 cm in the rising size of the product.
Colors: Grey / Black / Karekusa /Beige
Weight: Approximately 41g
Country of Origin: Japan
Producer: Shimada Co., Ltd. , Kanonji City, Kagawa Prefecture
Introduction:
This product is based on "Basic Cap" and is made by changing the material of the head part to mesh so that it can be worn comfortably even in summer while maintaining the size.
The design of the main body is a basic 6-piece joint. The eaves and the forehead are made of the same material as the Basic Cap. Only the four pieces of the main body parts are made of mesh material, the rest two pieces are maintained with the same material of "Basic Cap" .
In contrast to the design with a shallow body and short eaves like a cycle cap, the body is loose and deep, and the eaves part is not too affected by the wind, and Ridge Mountain Gear aimed for a length that can be expected to have a sunshade effect.
As well as the "Basic Cap", Mesh Basic Cap was created with the aim of creating a cap for who has a slightly larger head can wear it without stress. Therefore, the head size (head circumference) is a little looser than a general cap.
Material:
The cap is made of 100% nylon, which is water repellent, windproof and permeable, and Toray's Stunner® is used for the forehead. It prevents discomfort caused by sweating while preventing rain and wind, and has excellent durability and water repellency.
Although it is a synthetic fiber, in addition to a natural look like a cotton blend, the coating on the back side realizes a moderately firm texture.
The head part uses a very strong 100% nylon mesh material that is also used for stab vests. It is not a soft mesh and has some tension. It has both strength and breathability.
COOLMAX® fabric is used for the sweat-stopper part. It is made of 100% polyester, which is like Kanoko-shaped polyester, and has the functions of water absorption, quick drying, and UV protection (UPF 40+).
If the size of the product is larger than your head size (head circumference) or in situations that are easily affected by wind, you can adjust the size by pulling the plastic tab on the back and tightening the rubber.
*photo credit: Ridge Mountain Gear official website(https://www.ridge-mountaingear.com/)
*Product information translated by morimori
Material: Body part 100% nylon, mesh part 100% nylon, sweat-stopper part 100% polyester
Size: One size, Depth approx. 17.5 cm (when placed flat), Eaves length approx. 6 cm, Head circumference approx. 59 cm (adjustable with rubber)
* There may be an difference of ± 1 cm in the rising size of the product.
Colors: Grey / Black / Karekusa /Beige
Weight: Approximately 41g
Country of Origin: Japan
Producer: Shimada Co., Ltd. , Kanonji City, Kagawa Prefecture
Introduction:
This product is based on "Basic Cap" and is made by changing the material of the head part to mesh so that it can be worn comfortably even in summer while maintaining the size.
The design of the main body is a basic 6-piece joint. The eaves and the forehead are made of the same material as the Basic Cap. Only the four pieces of the main body parts are made of mesh material, the rest two pieces are maintained with the same material of "Basic Cap" .
In contrast to the design with a shallow body and short eaves like a cycle cap, the body is loose and deep, and the eaves part is not too affected by the wind, and Ridge Mountain Gear aimed for a length that can be expected to have a sunshade effect.
As well as the "Basic Cap", Mesh Basic Cap was created with the aim of creating a cap for who has a slightly larger head can wear it without stress. Therefore, the head size (head circumference) is a little looser than a general cap.
Material:
The cap is made of 100% nylon, which is water repellent, windproof and permeable, and Toray's Stunner® is used for the forehead. It prevents discomfort caused by sweating while preventing rain and wind, and has excellent durability and water repellency.
Although it is a synthetic fiber, in addition to a natural look like a cotton blend, the coating on the back side realizes a moderately firm texture.
The head part uses a very strong 100% nylon mesh material that is also used for stab vests. It is not a soft mesh and has some tension. It has both strength and breathability.
COOLMAX® fabric is used for the sweat-stopper part. It is made of 100% polyester, which is like Kanoko-shaped polyester, and has the functions of water absorption, quick drying, and UV protection (UPF 40+).
If the size of the product is larger than your head size (head circumference) or in situations that are easily affected by wind, you can adjust the size by pulling the plastic tab on the back and tightening the rubber.
*photo credit: Ridge Mountain Gear official website(https://www.ridge-mountaingear.com/)
*Product information translated by morimori
Material: Body part 100% nylon, mesh part 100% nylon, sweat-stopper part 100% polyester
Size: One size, Depth approx. 17.5 cm (when placed flat), Eaves length approx. 6 cm, Head circumference approx. 59 cm (adjustable with rubber)
* There may be an difference of ± 1 cm in the rising size of the product.
Colors: Grey / Black / Karekusa /Beige
Weight: Approximately 41g
Country of Origin: Japan
Producer: Shimada Co., Ltd. , Kanonji City, Kagawa Prefecture
Introduction:
This product is based on "Basic Cap" and is made by changing the material of the head part to mesh so that it can be worn comfortably even in summer while maintaining the size.
The design of the main body is a basic 6-piece joint. The eaves and the forehead are made of the same material as the Basic Cap. Only the four pieces of the main body parts are made of mesh material, the rest two pieces are maintained with the same material of "Basic Cap" .
In contrast to the design with a shallow body and short eaves like a cycle cap, the body is loose and deep, and the eaves part is not too affected by the wind, and Ridge Mountain Gear aimed for a length that can be expected to have a sunshade effect.
As well as the "Basic Cap", Mesh Basic Cap was created with the aim of creating a cap for who has a slightly larger head can wear it without stress. Therefore, the head size (head circumference) is a little looser than a general cap.
Material:
The cap is made of 100% nylon, which is water repellent, windproof and permeable, and Toray's Stunner® is used for the forehead. It prevents discomfort caused by sweating while preventing rain and wind, and has excellent durability and water repellency.
Although it is a synthetic fiber, in addition to a natural look like a cotton blend, the coating on the back side realizes a moderately firm texture.
The head part uses a very strong 100% nylon mesh material that is also used for stab vests. It is not a soft mesh and has some tension. It has both strength and breathability.
COOLMAX® fabric is used for the sweat-stopper part. It is made of 100% polyester, which is like Kanoko-shaped polyester, and has the functions of water absorption, quick drying, and UV protection (UPF 40+).
If the size of the product is larger than your head size (head circumference) or in situations that are easily affected by wind, you can adjust the size by pulling the plastic tab on the back and tightening the rubber.
*photo credit: Ridge Mountain Gear official website(https://www.ridge-mountaingear.com/)
*Product information translated by morimori