bonfus Iterus 38L (ULTRA 200 X Fabric)

Minimalist, comfortable and functional, the Iterus 38L is the lightweight backpacker’s dream pack.

Suitable for multi-days trips for ultralight adventurers with low base pack weight and volume, and perfect for weekend trips for more traditional hikers.

The Iterus 38L is a frameless pack that features some of the most technologically advanced waterproof materials to create a pack that is both very lightweight and durable.

Specification:

• Volume: 38 liters (30L internal volume, 8L external po

• Size:
  Unrolled height: 73m
  Average circumference: 85cm

• Torso length:
  up to 50cm/20 inches (first attachment loop)
  up to 55cm/22inches (lowest attachment loop)

• Materials:

  Ultra 200 X Black or White (130gsm | 3.85oz/sqy) – Probably the most advanced pack fabric on the market. It features woven 200D UHMWPE fibers. At a slight weight increase compared to DCF2.92, the Ultra 200 fabric has 3x higher tear strength, 3x higher UHMWPE fibers content, 7x the abrasion resistance. The backing of the fabric is a .75mil recycled polyester film, that makes the fabric extremely waterproof.

• Pack Weight: 
  Ultra 200X Black or White 355g
  • Webbing belt adds 40g (included). Optional padded hip belt

• Suggested carry load:
  up to 6-7kg without hip belts
  up to 8-9kg with removable webbing belt
  up to 9-10kg with padded removable hip belt 

• Country of origin: Mexico

Features:

• Convenient roll-top closure

• Functional 4-point compression cords that fully cover the pack sides from top to bottom, allowing to significantly reduce pack volume when needed.

• Big stretchy spandex/nylon front mesh stores a lot of gear.

• Durable side pockets with double-layer elastic at the hem to firmly hold your gear in place.

• Single webbing straps for carrying extra gear over roll top closure

• Comfortable 11mm (7/16”) thick shoulder straps, padded with EVA-foam and 3D spacer mesh.

• Daisy chain on shoulder straps for adding extra shoulder pouches or other gear.

• One sewn-in shoulder mesh stretch pocket

• Ice axe attachment point

• Chest straps with loops for lightweight hardware-free connection to the daisy chain.

• Included removable 2.5cm (1”) webbing belt, with two attachment loops to regulate for torso length. Optional removable padded hip belt (not included) can be used instead of webbing belt  (see pictures). For hip girths up to 115-120cm.

• Drainage hole at each side pocket

• Taped seams (only when choosing Ultra200 and DCF as pack material). Seam tape is applied to increase water resistance and increase seam strenght. The pack is higly water resistant, not waterproof. A pack liner is suggested to ensure pack content remains dry.

• Reinforced bottom section with Ultra400 fabric (for packs in Ultra 200 or Xpac) or DCF5.0 (for packs in DCF2.92).

• Robic 210D HDPE fabric for side pockets and shoulder straps, for added strength and durability

• Optional shoulder pouches and hip belt pockets (not included) can be mounted to the webbing loops of the shoulder straps and the removable padded hip belt.

Product image/s and texts: bonfus official page
* please noted that the photos showed are the Ultra 200 fabric but now are upgraded to Ultra 200 X