Ridge Mountain Gear Fleece Lazy Jacket
Spec
Material: 100% Polyester (Polartec® Wind Pro®)
Size:
S, M, L, XL (Men)
S, M, L (Women)
Color: Anvil Grey、Camel Beige、Olive Green、Black
Weight: Men / M about 376g
Country of Origin: Japan
Producer: Tokyo Pio Aomori Factory Co., Ltd.
Material
This product uses Polartec® Wind Pro®. Wind Pro® is a fleece material with improved cold protection. The knitted structure is tightly knitted with mesh to protect you from the cold while maintaining breathability. The surface of the fabric is flat and has a soft touch. It is also windproof and water repellent, dispersing heat and steam from your body.
Introduction
This item was created with the hope of alleviating the discomfort caused by the cold, allowing you to spend a comfortable time, and above all, allowing you to be lazy.The appearance is flat and soft to the touch, almost like vanilla ice cream. It is also windproof and water repellent, allowing heat and steam from the body to disperse and escape.
Design
A full-zip zipper jacket with a simple box silhouette and a relaxed fit. There is a large kangaroo pocket on the stomach area.
The most important part of this product is the stand collar. At first glance it looks like a normal stand collar, but it is different. The collar part uses a "collar stand" that is often used in the collars of stand collar coats. (Parts painted red in the image above)
This makes it a little different from regular stand collars, and Yusuke san have designed it so that it sticks to the neck and folds neatly even when the collar is folded.
The zipper has a double zip (reverse opening) specification, so it is possible to open only the hem separately.
The cuffs and hem have built-in soft flat elastic. Although the size cannot be adjusted, the fit is suitable for each size. The flat elastic at the hem is inserted from the side to the back.
Another feature is that it is sewn with flat seamers. As the name suggests, the seams of the fabric are very flat, reducing stress on the skin as much as possible. This manufacturing method is often used for sportswear and baby wear because it creates strong seams.
Regarding washing synthetic fleece products
We recommend using a special laundry net when washing synthetic fleece. Washing Bag prevents microplastic fibers from entering rivers and oceans when washing synthetic fabrics. By using the washing bag, the fibers discharged after washing gather in the corners of this bag and can be easily removed.
Attention
・Please turn the product inside out and put it in a laundry net and wash it separately.
・The water temperature should be limited to 40°C, and avoid washing with hot water.
・Use a neutral detergent and do not use bleach or fabric softener.
・Avoid tumble drying.
・Dry cleaning is not allowed.
・Do not iron.
・After dehydration, we recommend reshaping and drying in the shade.
Collaborator
Tokyo PiO Aomori Factory Co., Ltd. is located in Tsugaru City, Aomori Prefecture. Tokyo Pio Co., Ltd. was founded in Sumida Ward in 1971 as a small company where two people did everything from sewing to delivery. After that, the number of orders gradually increased, and from the Showa era to the Heisei era, they produced many products for major apparel and department stores, but as the times changed, overseas products that were made cheaply increased. They are still researching high quality with pride in building, accumulated technology and confidence.
Aomori Factory is a factory that mainly sews cut-and-sews, but also sews some other fabric products. There are many special sewing machines for sewing cut-and-sews. Not every cut and sew factory can sew this flat seam. Many factories do not have this sewing machine, and it takes skill to actually operate the sewing machine. The fact is the craftsman has left and the flatseamer cannot be operated now.
Pio Aomori Factory, which is also the base of their own sewing factory in Japan, started operations in 1999 with the aim of revitalizing local industry and employment after receiving an invitation from Kizomachi, Aomori Prefecture.
Credit: photos and description from Ridge Mountain Gear official website (https://www.ridge-mountaingear.com/)
*Product information translated and written by morimori
Spec
Material: 100% Polyester (Polartec® Wind Pro®)
Size:
S, M, L, XL (Men)
S, M, L (Women)
Color: Anvil Grey、Camel Beige、Olive Green、Black
Weight: Men / M about 376g
Country of Origin: Japan
Producer: Tokyo Pio Aomori Factory Co., Ltd.
Material
This product uses Polartec® Wind Pro®. Wind Pro® is a fleece material with improved cold protection. The knitted structure is tightly knitted with mesh to protect you from the cold while maintaining breathability. The surface of the fabric is flat and has a soft touch. It is also windproof and water repellent, dispersing heat and steam from your body.
Introduction
This item was created with the hope of alleviating the discomfort caused by the cold, allowing you to spend a comfortable time, and above all, allowing you to be lazy.The appearance is flat and soft to the touch, almost like vanilla ice cream. It is also windproof and water repellent, allowing heat and steam from the body to disperse and escape.
Design
A full-zip zipper jacket with a simple box silhouette and a relaxed fit. There is a large kangaroo pocket on the stomach area.
The most important part of this product is the stand collar. At first glance it looks like a normal stand collar, but it is different. The collar part uses a "collar stand" that is often used in the collars of stand collar coats. (Parts painted red in the image above)
This makes it a little different from regular stand collars, and Yusuke san have designed it so that it sticks to the neck and folds neatly even when the collar is folded.
The zipper has a double zip (reverse opening) specification, so it is possible to open only the hem separately.
The cuffs and hem have built-in soft flat elastic. Although the size cannot be adjusted, the fit is suitable for each size. The flat elastic at the hem is inserted from the side to the back.
Another feature is that it is sewn with flat seamers. As the name suggests, the seams of the fabric are very flat, reducing stress on the skin as much as possible. This manufacturing method is often used for sportswear and baby wear because it creates strong seams.
Regarding washing synthetic fleece products
We recommend using a special laundry net when washing synthetic fleece. Washing Bag prevents microplastic fibers from entering rivers and oceans when washing synthetic fabrics. By using the washing bag, the fibers discharged after washing gather in the corners of this bag and can be easily removed.
Attention
・Please turn the product inside out and put it in a laundry net and wash it separately.
・The water temperature should be limited to 40°C, and avoid washing with hot water.
・Use a neutral detergent and do not use bleach or fabric softener.
・Avoid tumble drying.
・Dry cleaning is not allowed.
・Do not iron.
・After dehydration, we recommend reshaping and drying in the shade.
Collaborator
Tokyo PiO Aomori Factory Co., Ltd. is located in Tsugaru City, Aomori Prefecture. Tokyo Pio Co., Ltd. was founded in Sumida Ward in 1971 as a small company where two people did everything from sewing to delivery. After that, the number of orders gradually increased, and from the Showa era to the Heisei era, they produced many products for major apparel and department stores, but as the times changed, overseas products that were made cheaply increased. They are still researching high quality with pride in building, accumulated technology and confidence.
Aomori Factory is a factory that mainly sews cut-and-sews, but also sews some other fabric products. There are many special sewing machines for sewing cut-and-sews. Not every cut and sew factory can sew this flat seam. Many factories do not have this sewing machine, and it takes skill to actually operate the sewing machine. The fact is the craftsman has left and the flatseamer cannot be operated now.
Pio Aomori Factory, which is also the base of their own sewing factory in Japan, started operations in 1999 with the aim of revitalizing local industry and employment after receiving an invitation from Kizomachi, Aomori Prefecture.
Credit: photos and description from Ridge Mountain Gear official website (https://www.ridge-mountaingear.com/)
*Product information translated and written by morimori
Spec
Material: 100% Polyester (Polartec® Wind Pro®)
Size:
S, M, L, XL (Men)
S, M, L (Women)
Color: Anvil Grey、Camel Beige、Olive Green、Black
Weight: Men / M about 376g
Country of Origin: Japan
Producer: Tokyo Pio Aomori Factory Co., Ltd.
Material
This product uses Polartec® Wind Pro®. Wind Pro® is a fleece material with improved cold protection. The knitted structure is tightly knitted with mesh to protect you from the cold while maintaining breathability. The surface of the fabric is flat and has a soft touch. It is also windproof and water repellent, dispersing heat and steam from your body.
Introduction
This item was created with the hope of alleviating the discomfort caused by the cold, allowing you to spend a comfortable time, and above all, allowing you to be lazy.The appearance is flat and soft to the touch, almost like vanilla ice cream. It is also windproof and water repellent, allowing heat and steam from the body to disperse and escape.
Design
A full-zip zipper jacket with a simple box silhouette and a relaxed fit. There is a large kangaroo pocket on the stomach area.
The most important part of this product is the stand collar. At first glance it looks like a normal stand collar, but it is different. The collar part uses a "collar stand" that is often used in the collars of stand collar coats. (Parts painted red in the image above)
This makes it a little different from regular stand collars, and Yusuke san have designed it so that it sticks to the neck and folds neatly even when the collar is folded.
The zipper has a double zip (reverse opening) specification, so it is possible to open only the hem separately.
The cuffs and hem have built-in soft flat elastic. Although the size cannot be adjusted, the fit is suitable for each size. The flat elastic at the hem is inserted from the side to the back.
Another feature is that it is sewn with flat seamers. As the name suggests, the seams of the fabric are very flat, reducing stress on the skin as much as possible. This manufacturing method is often used for sportswear and baby wear because it creates strong seams.
Regarding washing synthetic fleece products
We recommend using a special laundry net when washing synthetic fleece. Washing Bag prevents microplastic fibers from entering rivers and oceans when washing synthetic fabrics. By using the washing bag, the fibers discharged after washing gather in the corners of this bag and can be easily removed.
Attention
・Please turn the product inside out and put it in a laundry net and wash it separately.
・The water temperature should be limited to 40°C, and avoid washing with hot water.
・Use a neutral detergent and do not use bleach or fabric softener.
・Avoid tumble drying.
・Dry cleaning is not allowed.
・Do not iron.
・After dehydration, we recommend reshaping and drying in the shade.
Collaborator
Tokyo PiO Aomori Factory Co., Ltd. is located in Tsugaru City, Aomori Prefecture. Tokyo Pio Co., Ltd. was founded in Sumida Ward in 1971 as a small company where two people did everything from sewing to delivery. After that, the number of orders gradually increased, and from the Showa era to the Heisei era, they produced many products for major apparel and department stores, but as the times changed, overseas products that were made cheaply increased. They are still researching high quality with pride in building, accumulated technology and confidence.
Aomori Factory is a factory that mainly sews cut-and-sews, but also sews some other fabric products. There are many special sewing machines for sewing cut-and-sews. Not every cut and sew factory can sew this flat seam. Many factories do not have this sewing machine, and it takes skill to actually operate the sewing machine. The fact is the craftsman has left and the flatseamer cannot be operated now.
Pio Aomori Factory, which is also the base of their own sewing factory in Japan, started operations in 1999 with the aim of revitalizing local industry and employment after receiving an invitation from Kizomachi, Aomori Prefecture.
Credit: photos and description from Ridge Mountain Gear official website (https://www.ridge-mountaingear.com/)
*Product information translated and written by morimori