Ridge Mountain Gear Corduroy Basic Cap
Spec
Material: Body part 100% polyester, sweatband part 100% polyester
Size: One size
Depth: Approximately 17.5cm (when placed flat), Cap length: Approximately 6cm, Head circumference: Approximately 59cm (adjustable with rubber)
* There may be an difference of ± 1 cm in the rising size of the product. Thank you for your understanding. If you actually cover it, it will spread a little.
Color: Tate Olive、Smoke Navy、Fog Brown
Weight: Approx. 55g
Country of Origin: Japan
Producer: Shimada Co., Ltd., Kanonji City, Kagawa Prefecture
Introduction
The design of the main body is a basic 6-piece joint. In contrast to the design with a shallow body and short eaves like a cycle cap, the body is loose and deep, and the eaves part is not too affected by the wind, and Ridge Mountain Gear aimed for a length that can be expected to have a sunshade effect.
This "Basic Cap" was created with the aim of creating a cap for who has a slightly larger head can wear it without stress. Therefore, the head size (head circumference) is a little looser than a general cap.
Material
Made from 100% polyester tricot corduroy.
The ridges of corduroy are expressed using a warp knitting machine. Tricot corduroy with a softness unique to ``knitting''. Only the ridges on the surface are brushed, so unlike regular pile cut corduroy, the tufts will not fall out. It also has stretchability, which is difficult to achieve with corduroy.
COOLMAX® fabric is used in the sweatproof area.
Made of pique-shaped 100% polyester material that absorbs water quickly and has UV protection (UPF 40+).
The rubber cord built into the inside allows you to adjust the size to suit your head size.
Attention
-Please do not use detergents containing fluorescent brighteners or chlorine bleach.
-Please avoid tumbler drying.
-When ironing, be sure to use a pressing cloth and apply it from the back side.
-The core of the eaves part uses a soft core, so the core itself will not break when bent, but if the eaves part is bent too finely, it will wrinkle and it will take time to return to its original state. Please avoid bending it intentionally.
*photo credit: Ridge Mountain Gear official website(https://www.ridge-mountaingear.com/)
*Product information translated by morimori
Spec
Material: Body part 100% polyester, sweatband part 100% polyester
Size: One size
Depth: Approximately 17.5cm (when placed flat), Cap length: Approximately 6cm, Head circumference: Approximately 59cm (adjustable with rubber)
* There may be an difference of ± 1 cm in the rising size of the product. Thank you for your understanding. If you actually cover it, it will spread a little.
Color: Tate Olive、Smoke Navy、Fog Brown
Weight: Approx. 55g
Country of Origin: Japan
Producer: Shimada Co., Ltd., Kanonji City, Kagawa Prefecture
Introduction
The design of the main body is a basic 6-piece joint. In contrast to the design with a shallow body and short eaves like a cycle cap, the body is loose and deep, and the eaves part is not too affected by the wind, and Ridge Mountain Gear aimed for a length that can be expected to have a sunshade effect.
This "Basic Cap" was created with the aim of creating a cap for who has a slightly larger head can wear it without stress. Therefore, the head size (head circumference) is a little looser than a general cap.
Material
Made from 100% polyester tricot corduroy.
The ridges of corduroy are expressed using a warp knitting machine. Tricot corduroy with a softness unique to ``knitting''. Only the ridges on the surface are brushed, so unlike regular pile cut corduroy, the tufts will not fall out. It also has stretchability, which is difficult to achieve with corduroy.
COOLMAX® fabric is used in the sweatproof area.
Made of pique-shaped 100% polyester material that absorbs water quickly and has UV protection (UPF 40+).
The rubber cord built into the inside allows you to adjust the size to suit your head size.
Attention
-Please do not use detergents containing fluorescent brighteners or chlorine bleach.
-Please avoid tumbler drying.
-When ironing, be sure to use a pressing cloth and apply it from the back side.
-The core of the eaves part uses a soft core, so the core itself will not break when bent, but if the eaves part is bent too finely, it will wrinkle and it will take time to return to its original state. Please avoid bending it intentionally.
*photo credit: Ridge Mountain Gear official website(https://www.ridge-mountaingear.com/)
*Product information translated by morimori
Spec
Material: Body part 100% polyester, sweatband part 100% polyester
Size: One size
Depth: Approximately 17.5cm (when placed flat), Cap length: Approximately 6cm, Head circumference: Approximately 59cm (adjustable with rubber)
* There may be an difference of ± 1 cm in the rising size of the product. Thank you for your understanding. If you actually cover it, it will spread a little.
Color: Tate Olive、Smoke Navy、Fog Brown
Weight: Approx. 55g
Country of Origin: Japan
Producer: Shimada Co., Ltd., Kanonji City, Kagawa Prefecture
Introduction
The design of the main body is a basic 6-piece joint. In contrast to the design with a shallow body and short eaves like a cycle cap, the body is loose and deep, and the eaves part is not too affected by the wind, and Ridge Mountain Gear aimed for a length that can be expected to have a sunshade effect.
This "Basic Cap" was created with the aim of creating a cap for who has a slightly larger head can wear it without stress. Therefore, the head size (head circumference) is a little looser than a general cap.
Material
Made from 100% polyester tricot corduroy.
The ridges of corduroy are expressed using a warp knitting machine. Tricot corduroy with a softness unique to ``knitting''. Only the ridges on the surface are brushed, so unlike regular pile cut corduroy, the tufts will not fall out. It also has stretchability, which is difficult to achieve with corduroy.
COOLMAX® fabric is used in the sweatproof area.
Made of pique-shaped 100% polyester material that absorbs water quickly and has UV protection (UPF 40+).
The rubber cord built into the inside allows you to adjust the size to suit your head size.
Attention
-Please do not use detergents containing fluorescent brighteners or chlorine bleach.
-Please avoid tumbler drying.
-When ironing, be sure to use a pressing cloth and apply it from the back side.
-The core of the eaves part uses a soft core, so the core itself will not break when bent, but if the eaves part is bent too finely, it will wrinkle and it will take time to return to its original state. Please avoid bending it intentionally.
*photo credit: Ridge Mountain Gear official website(https://www.ridge-mountaingear.com/)
*Product information translated by morimori