Ridge Mountain Gear Basic Short Sleeve Shirt "Stripe"
Material: 100% polyester
Color: Blue × White、Grey × White
Size:
(Men) S, M, L, XL
(Women) S, M, L
Weight: Men / M Approx. 124ｇ
Country of Origin: Japan
Producer: Fashion Kobo Kuroishi Co., Ltd
Introduction
RIDGE MOUNTAIN GEAR's "Basic" line shirt.
There is a product called ``Basic Cap'' that the brand founder Yusuke Kurosawa himself wear all year round. With this shirt, he aimed to create a product that you would want to wear all year round. RIDGE MOUNTAIN GEAR's concept is to "make no difference between everyday life and the mountains."If you can go out into the mountains wearing your favorite everyday clothes, your closet will be tidy and your wallet will be kinder. With this in mind, he think about RIDGE MOUNTAIN GEAR products every day.
Material
This product uses "Primeflex® x Dot Air® 2-Way Sucker Stripes" with 4-way stretch (stretching both vertically and horizontally).
Primeflex® is an environmentally friendly stretch material developed by Toray Industries, Inc. Primeflex dries faster and has better elasticity than traditional polyester fabrics, allowing you to stay dry even after sweating.
Dot Air® is a functional material developed by Toray Industries, Inc. Using Toray's proprietary processing technology, the fabric has minute dot-shaped ventilation holes, making it highly breathable, lightweight, quick-drying, wrinkle-resistant, and has natural stretch. It also has water repellency.
The "Primeflex® x Dot Air® 2Way Sucker Stripe" used this time was born by combining these two functional materials.
"Sucker weave" is a type of fabric that is often used especially for summer items. Sucker weave is characterized by fine irregularities on the surface of the fabric, which help air flow and keep it away from the skin, making it cool to wear.
Design
RIDGE MOUNTAIN GEAR tried to create a basic design that can be worn on a daily basis without feeling out of place. It has a relaxing silhouette that is just the right distance from the body line.
This shirt has a simple design, but the brand founder pay close attention to the details.
“Round edge”
It is easily affected by wear, so Yusuke Kurosawa san designed it to eliminate sharp edge as much as possible.
“Top collar”
It is also assumed to be worn with the upper collar up. The top collar design can reduces the stress that the tip of the collar hits the neck as much as possible.
“Corners of cuffs”
“Chest pocket body and flap edge”
These parts are made into as small a round shape as possible. These places usually have sharp edges. Therefore, it is susceptible to wear and tear, and fraying is often noticeable. It is made into a small round to prevent wear even a little. Yusuke san is very careful when sewing small rounds. The pitch of the seams is reduced, which requires more hand movements, and it is very difficult to get a nice finish.
“Small collar set ”
The base collar and upper collar of this shirt are low and small. The pattern is set so that the upper collar sticks to the neck line when worn with the upper collar upright.
“Sleeves with momentum in the armpits”
The armholes are large enough to secure enough momentum at the side when raising the arms.
“Folding stitch”
All seams are sewn with felled seams. The felled seam is a method of sewing by folding the fabric so that the edge seam allowance is not visible. It takes a lot of time and effort to sew, but it is durable. On the other hand, if the seam allowance is processed with a lock sewing machine, nails may get caught in the thread, which may lead to unraveling.
“Snap button”
All buttons use resin snap buttons (YKK PLANCER®). You don't have to worry about losing the button due to thread breakage like with normal sewing buttons.
“Hanger loop”
A hanger loop is provided at the base of the back collar band. The hanger loop is a traditional shirt detail.
“Countermeasure against static electricity”
A special discharge tape is sewn into the garment to suppress the static electricity that tends to occur with clothing made of thin chemical fibers (nylon, polyester, etc.). (*From “Poly Basic Long Sleeve Shirt” which will be on sale from 2023)
Discharge tape was developed as a measure to reduce electrostatic voltage that has a negative effect on the human body. Discharge tape does not prevent static electricity, but by lowering the static voltage through discharge, it prevents the discomfort caused by static electricity. By installing it, it will not interfere with equipment such as mobile phones and computers. What's more, it has the effect of keeping pollen and dust out of the vicinity during discharge.
Collaborator
The factory that produces RIDGE MOUNTAIN GEAR shirts is Fashion Kobo Kuroishi Co., Ltd. Fashion Studio Kuroishi is a factory with about 50 employees located in Kuroishi City, Aomori Prefecture. Established in 2004. It is a factory that specializes in sewing shirts, and sews shirts from famous domestic manufacturers throughout the year. It produce about 60,000 shirts per year.
Attention
There is no big difference in the overall silhouette between the men's size (Men) and the women's size (Women), but the women's size (Women) has a silhouette that more closely matches the body shape of women, such as length and sleeve length.
This product can be used for a long time if you pay attention to the following care guide.
・ Please use a neutral detergent for washing.
・ Put the product inside out and put it in the laundry net.
・ The water temperature is limited to 40 ℃, and please avoid washing with boiling water.
・ Avoid tumble drying.
Credit: photos and description from Ridge Mountain Gear official website (https://www.ridge-mountaingear.com/)
*Product information translated and written by morimori
Material: 100% polyester
Color: Blue × White、Grey × White
Size:
(Men) S, M, L, XL
(Women) S, M, L
Weight: Men / M Approx. 124ｇ
Country of Origin: Japan
Producer: Fashion Kobo Kuroishi Co., Ltd
Introduction
RIDGE MOUNTAIN GEAR's "Basic" line shirt.
There is a product called ``Basic Cap'' that the brand founder Yusuke Kurosawa himself wear all year round. With this shirt, he aimed to create a product that you would want to wear all year round. RIDGE MOUNTAIN GEAR's concept is to "make no difference between everyday life and the mountains."If you can go out into the mountains wearing your favorite everyday clothes, your closet will be tidy and your wallet will be kinder. With this in mind, he think about RIDGE MOUNTAIN GEAR products every day.
Material
This product uses "Primeflex® x Dot Air® 2-Way Sucker Stripes" with 4-way stretch (stretching both vertically and horizontally).
Primeflex® is an environmentally friendly stretch material developed by Toray Industries, Inc. Primeflex dries faster and has better elasticity than traditional polyester fabrics, allowing you to stay dry even after sweating.
Dot Air® is a functional material developed by Toray Industries, Inc. Using Toray's proprietary processing technology, the fabric has minute dot-shaped ventilation holes, making it highly breathable, lightweight, quick-drying, wrinkle-resistant, and has natural stretch. It also has water repellency.
The "Primeflex® x Dot Air® 2Way Sucker Stripe" used this time was born by combining these two functional materials.
"Sucker weave" is a type of fabric that is often used especially for summer items. Sucker weave is characterized by fine irregularities on the surface of the fabric, which help air flow and keep it away from the skin, making it cool to wear.
Design
RIDGE MOUNTAIN GEAR tried to create a basic design that can be worn on a daily basis without feeling out of place. It has a relaxing silhouette that is just the right distance from the body line.
This shirt has a simple design, but the brand founder pay close attention to the details.
“Round edge”
It is easily affected by wear, so Yusuke Kurosawa san designed it to eliminate sharp edge as much as possible.
“Top collar”
It is also assumed to be worn with the upper collar up. The top collar design can reduces the stress that the tip of the collar hits the neck as much as possible.
“Corners of cuffs”
“Chest pocket body and flap edge”
These parts are made into as small a round shape as possible. These places usually have sharp edges. Therefore, it is susceptible to wear and tear, and fraying is often noticeable. It is made into a small round to prevent wear even a little. Yusuke san is very careful when sewing small rounds. The pitch of the seams is reduced, which requires more hand movements, and it is very difficult to get a nice finish.
“Small collar set ”
The base collar and upper collar of this shirt are low and small. The pattern is set so that the upper collar sticks to the neck line when worn with the upper collar upright.
“Sleeves with momentum in the armpits”
The armholes are large enough to secure enough momentum at the side when raising the arms.
“Folding stitch”
All seams are sewn with felled seams. The felled seam is a method of sewing by folding the fabric so that the edge seam allowance is not visible. It takes a lot of time and effort to sew, but it is durable. On the other hand, if the seam allowance is processed with a lock sewing machine, nails may get caught in the thread, which may lead to unraveling.
“Snap button”
All buttons use resin snap buttons (YKK PLANCER®). You don't have to worry about losing the button due to thread breakage like with normal sewing buttons.
“Hanger loop”
A hanger loop is provided at the base of the back collar band. The hanger loop is a traditional shirt detail.
“Countermeasure against static electricity”
A special discharge tape is sewn into the garment to suppress the static electricity that tends to occur with clothing made of thin chemical fibers (nylon, polyester, etc.). (*From “Poly Basic Long Sleeve Shirt” which will be on sale from 2023)
Discharge tape was developed as a measure to reduce electrostatic voltage that has a negative effect on the human body. Discharge tape does not prevent static electricity, but by lowering the static voltage through discharge, it prevents the discomfort caused by static electricity. By installing it, it will not interfere with equipment such as mobile phones and computers. What's more, it has the effect of keeping pollen and dust out of the vicinity during discharge.
Collaborator
The factory that produces RIDGE MOUNTAIN GEAR shirts is Fashion Kobo Kuroishi Co., Ltd. Fashion Studio Kuroishi is a factory with about 50 employees located in Kuroishi City, Aomori Prefecture. Established in 2004. It is a factory that specializes in sewing shirts, and sews shirts from famous domestic manufacturers throughout the year. It produce about 60,000 shirts per year.
Attention
There is no big difference in the overall silhouette between the men's size (Men) and the women's size (Women), but the women's size (Women) has a silhouette that more closely matches the body shape of women, such as length and sleeve length.
This product can be used for a long time if you pay attention to the following care guide.
・ Please use a neutral detergent for washing.
・ Put the product inside out and put it in the laundry net.
・ The water temperature is limited to 40 ℃, and please avoid washing with boiling water.
・ Avoid tumble drying.
Credit: photos and description from Ridge Mountain Gear official website (https://www.ridge-mountaingear.com/)
*Product information translated and written by morimori
Material: 100% polyester
Color: Blue × White、Grey × White
Size:
(Men) S, M, L, XL
(Women) S, M, L
Weight: Men / M Approx. 124ｇ
Country of Origin: Japan
Producer: Fashion Kobo Kuroishi Co., Ltd
Introduction
RIDGE MOUNTAIN GEAR's "Basic" line shirt.
There is a product called ``Basic Cap'' that the brand founder Yusuke Kurosawa himself wear all year round. With this shirt, he aimed to create a product that you would want to wear all year round. RIDGE MOUNTAIN GEAR's concept is to "make no difference between everyday life and the mountains."If you can go out into the mountains wearing your favorite everyday clothes, your closet will be tidy and your wallet will be kinder. With this in mind, he think about RIDGE MOUNTAIN GEAR products every day.
Material
This product uses "Primeflex® x Dot Air® 2-Way Sucker Stripes" with 4-way stretch (stretching both vertically and horizontally).
Primeflex® is an environmentally friendly stretch material developed by Toray Industries, Inc. Primeflex dries faster and has better elasticity than traditional polyester fabrics, allowing you to stay dry even after sweating.
Dot Air® is a functional material developed by Toray Industries, Inc. Using Toray's proprietary processing technology, the fabric has minute dot-shaped ventilation holes, making it highly breathable, lightweight, quick-drying, wrinkle-resistant, and has natural stretch. It also has water repellency.
The "Primeflex® x Dot Air® 2Way Sucker Stripe" used this time was born by combining these two functional materials.
"Sucker weave" is a type of fabric that is often used especially for summer items. Sucker weave is characterized by fine irregularities on the surface of the fabric, which help air flow and keep it away from the skin, making it cool to wear.
Design
RIDGE MOUNTAIN GEAR tried to create a basic design that can be worn on a daily basis without feeling out of place. It has a relaxing silhouette that is just the right distance from the body line.
This shirt has a simple design, but the brand founder pay close attention to the details.
“Round edge”
It is easily affected by wear, so Yusuke Kurosawa san designed it to eliminate sharp edge as much as possible.
“Top collar”
It is also assumed to be worn with the upper collar up. The top collar design can reduces the stress that the tip of the collar hits the neck as much as possible.
“Corners of cuffs”
“Chest pocket body and flap edge”
These parts are made into as small a round shape as possible. These places usually have sharp edges. Therefore, it is susceptible to wear and tear, and fraying is often noticeable. It is made into a small round to prevent wear even a little. Yusuke san is very careful when sewing small rounds. The pitch of the seams is reduced, which requires more hand movements, and it is very difficult to get a nice finish.
“Small collar set ”
The base collar and upper collar of this shirt are low and small. The pattern is set so that the upper collar sticks to the neck line when worn with the upper collar upright.
“Sleeves with momentum in the armpits”
The armholes are large enough to secure enough momentum at the side when raising the arms.
“Folding stitch”
All seams are sewn with felled seams. The felled seam is a method of sewing by folding the fabric so that the edge seam allowance is not visible. It takes a lot of time and effort to sew, but it is durable. On the other hand, if the seam allowance is processed with a lock sewing machine, nails may get caught in the thread, which may lead to unraveling.
“Snap button”
All buttons use resin snap buttons (YKK PLANCER®). You don't have to worry about losing the button due to thread breakage like with normal sewing buttons.
“Hanger loop”
A hanger loop is provided at the base of the back collar band. The hanger loop is a traditional shirt detail.
“Countermeasure against static electricity”
A special discharge tape is sewn into the garment to suppress the static electricity that tends to occur with clothing made of thin chemical fibers (nylon, polyester, etc.). (*From “Poly Basic Long Sleeve Shirt” which will be on sale from 2023)
Discharge tape was developed as a measure to reduce electrostatic voltage that has a negative effect on the human body. Discharge tape does not prevent static electricity, but by lowering the static voltage through discharge, it prevents the discomfort caused by static electricity. By installing it, it will not interfere with equipment such as mobile phones and computers. What's more, it has the effect of keeping pollen and dust out of the vicinity during discharge.
Collaborator
The factory that produces RIDGE MOUNTAIN GEAR shirts is Fashion Kobo Kuroishi Co., Ltd. Fashion Studio Kuroishi is a factory with about 50 employees located in Kuroishi City, Aomori Prefecture. Established in 2004. It is a factory that specializes in sewing shirts, and sews shirts from famous domestic manufacturers throughout the year. It produce about 60,000 shirts per year.
Attention
There is no big difference in the overall silhouette between the men's size (Men) and the women's size (Women), but the women's size (Women) has a silhouette that more closely matches the body shape of women, such as length and sleeve length.
This product can be used for a long time if you pay attention to the following care guide.
・ Please use a neutral detergent for washing.
・ Put the product inside out and put it in the laundry net.
・ The water temperature is limited to 40 ℃, and please avoid washing with boiling water.
・ Avoid tumble drying.
Credit: photos and description from Ridge Mountain Gear official website (https://www.ridge-mountaingear.com/)
*Product information translated and written by morimori